AKTUELL

Dagens erbjudanden

Utlopp

Festool EXCLUSIVES

Vad är nytt

Kunskapsbas

PRODUKTER

Polar Bear CNC

Batterier & Laddare

CNC Maskin & Tillbehör

Specialmaskin

Sandning & Polera

Hyvling

Dammsuga & Luftfilter

Fräse

Handverktyg

Lim, Epoxi & Sammanfogning

Borra & Skruva

Klämmor

Svarvning

Byggarbetsplats

Sågning

Skärpning

Verkstadstillbehör

V-slot & Open Source Parts

Varumärken

Presentkort

Köpkorg

Mitt konto

Leverans land

Startsida PRODUKTER Svarvning Trä Svarva

TEKNATOOL - NOVA NEBULA DVR lathe

The new NOVA lathe from TEKNATOOL with many practical details and the tried and tested DVR drive concept.

No belt shifting and optimal power development even at low speeds thanks to the DVR direct drive. The headstock can be rotated and moved. All important components (bench bed, substructure, headstock, tailstock and lower part of the hand rest) are made of solid gray cast iron.

Details on the DVR drive:

The special thing about this unique drive concept is the Digital Variable Reluctance (DVR) motor built into the headstock with direct drive and extremely gentle yet powerful power transmission to the spindle.
The system ensures the best possible power on the spindle, especially at low speeds, which makes it easier to machine large and/or unbalanced workpieces.
Since there is no belt installed, there is no need to preselect a speed range by shifting such a belt and there is no loss of power, as is the case with many other machines.

The user interface of the digital display can be set to German, English or French and is very user-friendly and logically structured.

The spindle speed can be controlled or adjusted using the rotary/push button on the control panel of the headstock or the rotary button on the mobile magnetic control box:

When adjusting the speed on the headstock, a distinction is made between quick adjustment (pressing the speed button while turning) and fine adjustment (turning the speed button without pressing it).
The magnet control box is programmed as a "slave" of the control panel on the headstock. The speed can be adjusted using the rotary knob in steps of 20 or 50 rpm (depending on the speed). The magnetic control box also has the "ON" function (switch on by pressing the "ON" button for 2 seconds) and an EMERGENCY STOP function (EMERGENCY STOP mushroom button with locking function).

All other functions are controlled and set via the control panel on the headstock:

A total of 8 speeds are preset and can be selected directly or reprogrammed as desired. This significantly increases the comfort when working.
The individual functions are acoustically underlined and thus promote the intuitive operation of the machine and ensure additional safety, for example when switching from forward to reverse.
The machine has a vibration sensor function, which switches off the machine in the event of strong vibrations for the safety of the user (can be preset in 3 levels, depending on requirements and the nature of the workpiece).
A timer function makes it easier to dry a processed workpiece - the surface of the workpiece dries evenly through the rotary movement, the machine switches itself off after the preset time.
An idle detection switches the machine off after a few minutes of idling - this prevents the machine from running unattended for a long time.
The braking force when switching off the machine can be set individually via the menu.
The type of cut can be preselected via the speed diagram (e.g. roughing) and the recommended speed can be controlled directly, which can then be adjusted using the speed controller.
The font size on the main display can be switched between "normal" and "large".
The lathe can be locked with a password to prevent unauthorized use.
The machine is de-energized via the main switch.

Basic equipment of the machine:

Bench bed, headstock and tailstock as well as substructure made of solid gray cast iron
Rotating and sliding headstock with grid function
Round steel hand rest "Modular" 300 mm (spigot 25.4 mm)
Four-pronged driver and 2 pcs. center punch MK2
Hand wheel 120 mm on the headstock
faceplate 150 mm (ASR-Euro)
Safety ring ASR-Euro
DVR drive with digital display, acoustically stored functions and memory function for popular speeds
Additionally with magnetic box for speed control and OFF/ON function
Massive adjustable feet with M20 thread
Tool tray with mat

Technical specifications:

Center height approx. 230 mm
Distance between centers max. 680 mm
Spindle connection M33 x 3.5 with ASR (Euro) safety groove
Spindle and tailstock cone MK2
Infinitely variable speed (direct drive): 100 – 5,000 rpm
24 step part setup
Motor 2.3 HP (230 V) with forward and reverse
Tailstock quill travel 120 mm (with scale and trapezoidal thread)
Weight 204kg
Packing weight approx. 225 kg

0 Recensioner

av kunder rekommenderar denna produkt

TEKNATOOL - NOVA NEBULA DVR lathe

| 0 Recensioner

€ 3315,00

Exkl. moms: € 2641.43

Nummer: DT55604

Beräknad leverans: Cirka 14 dagar

Du kommer få 663 rabattpoäng

Quick chuck for column drills and lathes - MK2

Pikaistukka B16 - 1-16mm (vaatii MK2 tai MK3 sovitteen)

Beräknad leverans: 1-3 dagar

+ 100.98 €

Pikaistukan B16 kara - MK3

Beräknad leverans: Fråga tillgänglighet

+ 19.28 €

Pikaistukan B16 tuurna - MK2

Beräknad leverans: 1-3 dagar

+ 15.20 €

Lägg i köpkorgen

Lägg på önskelistan

Anbudsbegäran

TEKNATOOL - NOVA NEBULA DVR lathe

Nummer: DT55604

Förnamn

Efternamn

Adress

Postnummer

Kommun

Land

E-post

Telefon

LEASING

Leasingkorg € 246.09/m.

Månadsbetalning: € 246.09

Leasingtid:

Slutligt anskaffningspris: € 80.2

Endast för företag. Momsregistreringsnummer krävs.

Visa mer

Beräkningarna är baserade på Grenkes leasingprislista, som inte inkluderar försäkring. Försäkring är obligatorisk och kunden kan antingen köpa sin egen försäkring eller ta ut den med samma kontrakt. Leasingfinansiering beviljas endast till företag med giltigt FO-nummer.

Leasingperiod 12-72 månader.

Leasingpriser är moms 0.

Möjlighet att lösa in i slutet för ditt eget slutliga leveranspris, vilket kommer att visas under produkten och i sammanfattningen. Det lägsta slutliga leveranspriset är 70 € moms 0.

Efter att du har gjort en beställning med leasingfinansiering får du inom 1-2 dagar via e-post kontrakten för elektronisk signatur.

Om du vill använda din egen försäkring kommer leasingbolaget att kräva ett försäkringsintyg som visar följande:

Företagets namn
Försäkringsbrevets nummer
Information om att den utrustning som omfattas av avtalet är försäkrad, eller information om att företaget har en egendomsförsäkring
Försäkringsbolagets namn/logotyp
Försäkringen är i kraft/datum för försäkringsbeviset
Försäkringsbeloppet täcker värdet på avtalet (månadsbelopp x tid)

AVBETALNING

Nettiverstas - Instagram

Nettiverstas - YouTube