TALVIKAMPANJA
 - Record Power puuntyöstökoneita ja tarvikkeita erittäin edullisesti! KATSO TARJOUKSET

LUE LISÄÄ
Kirjaudu sisään
Toimitusmaa

ENT T-Ura Jyrsinteräsarja - 5 Terää M5/M6/M8/M10/M12 S=8

ENT T-Ura Jyrsinteräsarja - 5 Terää M5/M6/M8/M10/M12 S=8

T-Slot Cutter Set ENT for M5, M6, M8, M10 & M12 Bolts

The new T-Slot Routing Cutter set from ENT contains five of the most common  T-Slot Routing Cutters for M5, M6, M8, M10 and M12. Thanks to the high quality transparent packaging, all cutters are quickly to hand and after use safely stowed away. The three sizes included allow T-slots to be cut which can be used for bolts with metric thread or for T-nuts. Stops can thus be can be used directly in the material and fixed without the use of profile rails. Also for making recesses on picture frames, This set is ideal for creating countersinks for electrical cables. The router cutters M5 and M6 are designed with one peripheral cutting edge, the cutters for M8, M10 and 12 have two peripheral cutting edges.  The cutter is suitable for routing all types of wood (hardwood and softwood), but for drilling in only to a limited extent (only softwood).

Technical data:

M5 T-Slot Routing Cutter:

  • D1: 8.5 mm
  • D2 : 5.6 mm
  • NL1: 7 mm
  • NL2: 4,5 mm
  • S: 8 mm
  • SL: 32 mm
  • Number of cutting edges: Z1

M6 T-Slot Routing Cutter:

  • D1: 10.5 mm
  • D2 : 6.6 mm
  • NL1: 7 mm
  • NL2: 5,5 mm
  • S: 8 mm
  • SL: 32 mm
  • Number of cutting edges: Z1

M8 (corresponds T-Slot Routing Cutter for the sauter C-rail profile):

  • D1: 13.5 mm
  • D2: 8.6 mm
  • NL1: 7 mm
  • NL2: 7 mm
  • S: 8 mm
  • SL: 32 mm
  • Number of cutting edges: Z2

M10 T-Slot Routing Cutter:

  • D1: 17.5 mm
  • D2: 10.6 mm
  • NL1: 7 mm
  • NL2: 8,5 mm
  • S: 8 mm
  • SL: 32 mm
  • Number of cutting edges: Z2

M12 T-Slot Routing Cutter:

  • D1: 19.5 mm
  • D2: 12.6 mm
  • NL1: 7 mm
  • NL2: 9,5 mm
  • S: 8 mm
  • SL: 32 mm
  • Number of cutting edges: Z2

Tuotemerkki:    ENT

0
0 arvostelua
0%
asiakkaista suosittelee tätä tuotetta


ENT T-Ura Jyrsinteräsarja - 5 Terää M5/M6/M8/M10/M12 S=8

€ 199,00
Veroton: € 160.48
Numero: E-09055
Toimitusaika: 1-3 päivää
Saat 39.8 alennuspistettä
Lisää toivelistalle
LEASING
Kuukausierä:15.03
Leasingaika:
Loppulunastushinta:70
Vain yrityksille (vaatii Y-tunnuksen).

Laskelmat perustuu Grenke-leasing hinnastoon, joka ei sisällä vakuutusta. Vakuutus on pakollinen ja asiakas voi hankkia joko oman vakuutuksen tai ottaa sen samalla sopimuksella. Leasing-rahoitus myönnetään vain yrityksille, joilla voimassa oleva Y-tunnus.

Leasingaika 12-72 kk.

Leasinghinnat alv 0.

Mahdollisuus lunastaa lopussa omaksi loppulunastushinnalla, joka näkyy tuotteen kohdalla ja yhteenvedossa. Loppulunastushinta on minimissään 70€ alv 0.

Lähetettyäsi tilauksen leasing rahoituksella, saat 1-2 päivän sisällä sähköpostissa sopimukset sähköisesti allekirjoitettavaksi.

Mikäli haluat käyttää omaa vakuutusta, leasing-yhtiö tarvitsee vakuutustodistuksen, josta käy ilmi seuraavat asiat:

  • Yrityksen nimi
  • Vakuutussopimusnumero
  • Tieto että sopimuksella olevat laitteet on vakuutettu, tai tieto siitä että yrityksellä on omaisuusvakuutus
  • Vakuutusyhtiön nimi/logo
  • Vakuutus on voimassa / vakuutustodistuksen päivämäärä
  • Vakuutusmäärä kattaa sopimuksen arvon (kk summa x aika)
OSAMAKSU


Nettiverstas - Instagram
Nettiverstas - YouTube
Loading...