TALVIKAMPANJA
 - Record Power puuntyöstökoneita ja tarvikkeita erittäin edullisesti! KATSO TARJOUKSET

LUE LISÄÄ
Kirjaudu sisään
Toimitusmaa

CMT - 5-osainen oksaporasarja 15-20-25-30-35mm

CMT - 5-osainen oksaporasarja 15-20-25-30-35mm
CMT - 5-osainen oksaporasarja 15-20-25-30-35mm
We offer a wide range of Forstner bits in the most popular diametres. These bits are available separately or in beautiful wooden sets. The high performance stagger tooth design on the bits with larger diametres allows for sharp holes with straight sides and flat bottoms. Bits available for drill presses, electric and cordless drills and suitable to work on any type of softwood.

Bits available with the following diameters: 15-20-25-30-35mm.



TIPS AND WARNINGS

-Making repeated shallow cuts and allowing the bit to cool for two or three seconds between passes will increase the life of your bit. Overheating caused by chip buildup or constant contact with the cutting surface will remove the temper from the bit’s cutting edges.

-You can also extend the life of your bits by not exceeding the maximum speed recommended for the type of wood. Applying excessive force to the bit while drilling will also cause overheating.

-Remove all the chips from the previous hole before boring a second or subsequent hole when mortising.

-Small Forstner bits can be used in a hand drill, but the results are usually less than satisfactory. Using bits larger than 19mm (3/4”) in a hand drill can cause injury when the bit hangs on an imperfection in the wood.

-Always wear proper eye and hearing protection when working with power tools.

 

Tuotemerkki:    CMT

0
0 arvostelua
0%
asiakkaista suosittelee tätä tuotetta


CMT - 5-osainen oksaporasarja 15-20-25-30-35mm

€ 69,40
Veroton: € 55.97
Numero: 537.000.05
Toimitusaika: 1-3 päivää
Saat 13.88 alennuspistettä
Lisää toivelistalle
LEASING
Kuukausierä:5.24
Leasingaika:
Loppulunastushinta:70
Vain yrityksille (vaatii Y-tunnuksen).

Laskelmat perustuu Grenke-leasing hinnastoon, joka ei sisällä vakuutusta. Vakuutus on pakollinen ja asiakas voi hankkia joko oman vakuutuksen tai ottaa sen samalla sopimuksella. Leasing-rahoitus myönnetään vain yrityksille, joilla voimassa oleva Y-tunnus.

Leasingaika 12-72 kk.

Leasinghinnat alv 0.

Mahdollisuus lunastaa lopussa omaksi loppulunastushinnalla, joka näkyy tuotteen kohdalla ja yhteenvedossa. Loppulunastushinta on minimissään 70€ alv 0.

Lähetettyäsi tilauksen leasing rahoituksella, saat 1-2 päivän sisällä sähköpostissa sopimukset sähköisesti allekirjoitettavaksi.

Mikäli haluat käyttää omaa vakuutusta, leasing-yhtiö tarvitsee vakuutustodistuksen, josta käy ilmi seuraavat asiat:

  • Yrityksen nimi
  • Vakuutussopimusnumero
  • Tieto että sopimuksella olevat laitteet on vakuutettu, tai tieto siitä että yrityksellä on omaisuusvakuutus
  • Vakuutusyhtiön nimi/logo
  • Vakuutus on voimassa / vakuutustodistuksen päivämäärä
  • Vakuutusmäärä kattaa sopimuksen arvon (kk summa x aika)
OSAMAKSU

Bits available with the following diameters: 15-20-25-30-35mm.



Nettiverstas - Instagram
Nettiverstas - YouTube
Loading...