TALVIKAMPANJA
 - Record Power puuntyöstökoneita ja tarvikkeita erittäin edullisesti! KATSO TARJOUKSET

LUE LISÄÄ
Kirjaudu sisään
Toimitusmaa

AMB - Router 1400 FME-U DI 230V (EU) man. Toolchange-Unit

AMB -  Router 1400 FME-U DI 230V (EU) man. Toolchange-Unit

By popular demand, the successful model is now also available with the powerful 1.4 kW motor.

The manual tool changing system with a digital control option - extremely robust and optimized for all types of milling work - is particularly suitable for use on portal milling machines or CNC routers.

The FME-U DI offers a completely new concept. For the first time, spindle bearings are used in a stable, robust aluminum body for optimum precision and minimal wear.
Milling cutters etc. can be changed in seconds and without tools - a revolution.

DI stands for direct control option via the controller. The speed required for the application can be selected or programmed directly there. This reduces the noise; the duty cycle can be increased; wear is reduced.

The motor is attached directly and torsion-resistant to the portal via 4 threaded connections.

Motor, bearings, and seals are designed for use with longer duty cycles.

Full-wave control electronics ensure the same speed even with hard milling work. Speed ??selection and soft start are a matter of course at AMB.

The motor is protectively insulated and offers maximum security against external influences.

The electronics are perfectly protected against dust and external influences by complete encapsulation - in comparison, other suppliers often work with unprotected electronics with shorter service life.

Electronic thermal overload protection protects against overheating.

Original carbon brushes Made in Germany - with integrated switch-off. This prevents the collector from being damaged when the coal is worn out. Additional silicone cushions between carbon and pressure spring ensure a long service life through vibration damping.

Versatile applications - for inclusion in e.g.: CNC portals (routers), routers, milling devices, drill stands,...

The ER16 collet holder corresponds to the industry standard and is available everywhere in the world.

Unrivaled light at only 3.4 kg.

Milling motor with tool changing system, precision collet ER16, 3 x clamping rings, 4m power cable module, operating instructions.

Recording power :1400watt
speed :3,500...22,000rpm
Fastening to the portal :Drilling pattern with 4x M8mm
Collet :ER16-8mm
weight :3.3kg
Mains connection :Power cord module 4

m

Tuotemerkki:    AMB

0
0 arvostelua
0%
asiakkaista suosittelee tätä tuotetta


AMB - Router 1400 FME-U DI 230V (EU) man. Toolchange-Unit

€ 960,00
Veroton: € 774.19
Numero: AMB6082808
Toimitusaika: 10-20 Arkipäivää
Saat 192 alennuspistettä
Lisää toivelistalle
LEASING
Kuukausierä:72.5
Leasingaika:
Loppulunastushinta:70
Vain yrityksille (vaatii Y-tunnuksen).

Laskelmat perustuu Grenke-leasing hinnastoon, joka ei sisällä vakuutusta. Vakuutus on pakollinen ja asiakas voi hankkia joko oman vakuutuksen tai ottaa sen samalla sopimuksella. Leasing-rahoitus myönnetään vain yrityksille, joilla voimassa oleva Y-tunnus.

Leasingaika 12-72 kk.

Leasinghinnat alv 0.

Mahdollisuus lunastaa lopussa omaksi loppulunastushinnalla, joka näkyy tuotteen kohdalla ja yhteenvedossa. Loppulunastushinta on minimissään 70€ alv 0.

Lähetettyäsi tilauksen leasing rahoituksella, saat 1-2 päivän sisällä sähköpostissa sopimukset sähköisesti allekirjoitettavaksi.

Mikäli haluat käyttää omaa vakuutusta, leasing-yhtiö tarvitsee vakuutustodistuksen, josta käy ilmi seuraavat asiat:

  • Yrityksen nimi
  • Vakuutussopimusnumero
  • Tieto että sopimuksella olevat laitteet on vakuutettu, tai tieto siitä että yrityksellä on omaisuusvakuutus
  • Vakuutusyhtiön nimi/logo
  • Vakuutus on voimassa / vakuutustodistuksen päivämäärä
  • Vakuutusmäärä kattaa sopimuksen arvon (kk summa x aika)
OSAMAKSU




Nettiverstas - Instagram
Nettiverstas - YouTube
Loading...